Establishment of the mid-sagittal reference plane for three-dimensional assessment of facial asymmetry: a systematic review : Establishment of the mid-sagittal reference plane: a systematic review.

OBJECTIVE: To systematically review the literature for mid-sagittal plane establishment approaches to identify the most effective method for constructing the mid-sagittal plane for the evaluation of facial asymmetry. MATERIALS AND METHODS: Six electronic databases (PubMed, Medline (via Ovid), EMBASE (via Ovid), Cochrane Library, Web of Science, and Scopus) and grey literature were searched for the studies that computed the mid-sagittal reference plane three-dimensionally, using a combination of MeSH terms and keywords. The methodological quality and the level of evidence for the included studies were analyzed using QUADAS-2 and GRADE, respectively. RESULTS: The preliminary search yielded 6746 records, of which 42 articles that met the predefined inclusion criteria were included in the final analysis. All the included articles reported the construction of the mid-sagittal reference plane (MSP) using varied methods. The risk of bias and concerns regarding the applicability of the included studies were judged to be 'low'. The level of evidence was determined to be 'low' for the effectiveness of the technique and 'moderate' for the ease of clinical applicability. CONCLUSION: Despite methodological heterogeneity, this review substantiates the comparable efficacy of cephalometric and morphometric MSP construction methods. A fully automated morphometric MSP holds promise as a viable option for routine clinical use. Nevertheless, future prospective studies with an emphasis on the impact, accuracy, and clinical applicability of MSP construction techniques in cases of facial asymmetry are required. CLINICAL RELEVANCE: The present review will assist clinicians in selecting the most suitable method for MSP construction, leading to improved treatment planning and ultimately more favorable treatment outcomes.

Using craniofacial fluctuating asymmetry to examine the effects of sex, socioeconomic status, and early life experiences on adult age at death in industrial England.

OBJECTIVES: Historical evidence from 18th- and 19th-century England suggests that industrialization's impacts on health were largely negative, especially among marginalized groups. However, available documentary evidence is often biased toward adult men and rarely sheds light on the experiences of other members of the population, such as women and children. Craniofacial fluctuating asymmetry (FA) can serve as a proxy measurement of developmental instability and stress during development. This study examines the associations among age, sex, socioeconomic status (SES), and FA in skeletal samples from industrial-era England. MATERIALS AND METHODS: The sample for this study comes from four industrial-era cemeteries from England (A.D. 1711-1857). Geometric morphometric analyses of three-dimensional landmark coordinate data were used to generate a measure of FA for each individual (Mahalanobis distance). A three-way ANOVA was used to evaluate the impacts of sex, SES, and FA scores on adult age at death (n = 168). RESULTS: Significant associations existed between age at death and SES (p = 0.004) and FA scores (p = 0.094). Comparisons of the estimated means indicated that age at death was consistently higher among high SES individuals and individuals with FA scores less than one standard deviation from the mean. CONCLUSIONS: This study supports findings from previous studies that have suggested that the differences in resource access and environmental buffering generated by socioeconomic inequality can impact longevity and patterns of mortality among socioeconomic status groups. Likewise, stress in early life-evinced by craniofacial fluctuating asymmetry-can influence observed patterns of longevity in adults decades later.

Mandibular condyle volumes are associated with facial asymmetry in patients with cleft lip and palate: A retrospective cohort study.

This study compares condylar volumetric asymmetry and facial asymmetry in patients with cleft lip and/or palate (CLP) and controls. The mandibular condyle is important to facial growth, but its role in facial asymmetry for those with CLP has not been described. Condylar volumes and mandibular asymmetry were retrospectively calculated using Mimics Version 23.0 (Materialise, Leuven, Belgium) from patients with CLP undergoing computed tomography (CT) imaging and a cohort of controls. A total of 101 participants, 60 with CLP and 41 controls, had mean condylar volumetric asymmetry of 16.4 ± 17.4 % (CLP) and 6.0 ± 4.0 % (controls) (p = 0.0002). Patients with CLP who had clinically significant chin deviation (>4 mm) had more asymmetric condyles than those without significant chin deviation (p = 0.003). The chin deviated toward the smaller condyle in patients with facial asymmetry more often than in patients without facial asymmetry (81 % vs. 62 %, p = 0.033). While controls had some degree of condylar asymmetry, it tended to be milder and not associated with facial asymmetry. There is a greater degree of condylar volumetric asymmetry in patients with CLP compared to individuals in the general population. Clinically significant facial asymmetry in CLP is associated with a higher degree of condylar asymmetry, with the facial midline deviating toward the smaller condyle.

Facial asymmetry of the hard and soft tissues in skeletal Class I, II, and III patients.

To investigate and compare the facial asymmetry (hard and soft tissues) among skeletal Class I, II, and III patients. A total of 221 subjects, including skeletal Class I (n = 80), skeletal Class II (n = 75), and skeletal Class III (n = 66), were included in the study. CBCT, 22 skeletal landmarks, and 10 soft tissue landmarks were used for the measurements and the asymmetry index was calculated to assess the facial asymmetry. Statistical analyses included one-way ANOVA, Kruskal-Wallis test, and Spearman correlation analysis. The skeletal Class III patients presented greater asymmetry than Class II patients for 10 hard tissue landmarks and 3 soft tissue landmarks (p < 0.05). High correlation of asymmetry was found between four soft tissue landmarks and their corresponding skeletal landmarks (rs ≥ 0.71), as well as Me and ANS (r > 0.86). The ANS and Me in 21.3% patients deviated to contralateral sides. The skeletal Class III patients had more facial asymmetry than the Class II patients. Soft tissues showed similar asymmetry as the underlying hard tissues rather than a compensation of the hard tissue asymmetry. The inconsistency in the deviation of Me and ANS may exacerbate facial asymmetry.

[Preliminary evaluation of chin symmetry with three dimentional soft tissue spatial angle wireframe template].

OBJECTIVE: To develop an efficient and robust method based on three dimensional facial landmarks for evaluating chin region asymmetry at the soft tissue level and to compare it with the traditional mirror-overlap analysis method in order to test its availability. METHODS: Standard symmetrical face was used for mental tubercle coordinate transformation so as to filter soft tissue three dimensional spatial angle and construct corresponding three dimensional spatial angle wireframe template. Ten patients aged 12-32 years with clinical chin region asymmetry diagnosis at the Department of Orthodontics of Peking University Hospital of Stomatology from November 2020 to November 2021 were randomly selected. Three dimensional soft tissue face scan data of the patients were collected by three dimensional face scanner and the landmark points were automatically determined by the Meshmonk non-rigid registration algorithm program, and in this way, the asymmetric three dimensional spatial angle wireframe template and corresponding spatial angle parameters were generated. Mirror-overlap analysis of face scan data was also performed in Geomagic Studio 2015 software and deviation color maps were generated. This study took mirror-overlap analysis as the gold standard method, the response rate of chin region asymmetry was eva-luated by the outcomes of the mirror-overlap analysis and three dimensional spatial angle wireframe template analysis. RESULTS: Nine three dimensional spatial angle indicators were selected through coordinate transformation, and the response rate was calculated using mirror-overlap analysis as the gold standard method. Among these ten selected patients, the response rate of the total chin region asymmetry was 90% (9/10). Using the deviation value of mirror-overlap analysis as a reference, the response rate of chin region asymmetry in the X dimension was 86%, the response rate of chin region asymmetry in the Y dimension was 89%, and the response rate of chin region asymmetry in the Z dimension was 100%. CONCLUSION: The three dimensional soft tissue spatial angle wireframe template proposed in this study has some feasibility in evaluating chin region asymmetry at the soft tissue level, and its ability to recognize asymmetry separately in the three dimensional direction is better than the mirror-overlap analysis method, and the indicators recognition rate still needs to be further improved.

Photoanthropometric craniofacial parameters in individuals with osteogenesis imperfecta / Parámetros craneofaciales fotoantropométricos en personas con osteogénesis imperfecta

Background: This study aimed to evaluate facial photoanthropometric parameters in patients with OI.Material and Methods: We selected 20 Brazilian patients diagnosed with OI treated at the Extension Service forMinors in Need of Specialized Treatment of the Dentistry Course at the Federal University of Ceará (Fortaleza,Brazil), of both sexes, without age restriction, and able to understand and sign the informed consent form (ICF).As a control group, 38 non-syndromic Brazilian individuals, categorized as ASA I, able to understand and sign theICF, matched by sex, age, and Legan and Burstone facial profile were selected. The exclusion criteria were: previ-ous orthodontic treatment, craniofacial trauma and/or surgery, and the presence of any other systemic diseases.Photoanthropometric analysis of the 18 facial parameters proposed by Stengel-Rutkowski et al. (1984), previouslyestablished in the literature for craniofacial syndromes, were conducted. A single examiner digitally performedall effective and angular measurements with the CorelDRAWX7® software.Results: Horizontally shortened ears (p<0.001) but larger in height in relation to the face (p=0.012) were shownto be alterations belonging to individuals with OI.Conclusions: OI patients present distinct photoanthropometric parameters inherent in this condition.(AU)

Esthetic Surgery of the Chin in Cis- and Transgender Patients-Application of T-Genioplasty vs. Single-Piece Segment Lateralization.

Background and Objectives: Correction of lower face asymmetry still remains challenging in maxillofacial surgery. This report describes techniques for the lateral transposition of the symphyseal segment to restore lower face symmetry while maintaining gender-related features in cis- and transgender patients. Materials and Methods: A retrospective review of medical records of 31 patients who attended for esthetic corrective surgery after orthodontic camouflage or orthognathic treatment, or during facial feminization of the lower face between June 2021 and June 2023 was performed. Result: All patients underwent lateralization genioplasty (with or without advancement or setback), either with or without narrowing T-osteotomy supplemented with necessary procedures in order to obtain proper facial balance and desired esthetical effects, such as bichectomy, liposuction, and face and neck lift. The mean asymmetry of the chin was 5.15 mm and was surgically corrected either by single segment lateralization or T-shape narrowing genioplasty depending on the gender and esthetical requirements. No complications were reported. Conclusions: Lateral shift genioplasty serves as a powerful tool in primary and secondary corrective surgery for lower face asymmetry that maintains gender-specific facial features. It may serve either as an additive to orthodontic camouflage or a way to correct previous orthognathic surgery pitfalls. The surgeon performing esthetic genioplasty associated with gender-specific expectations must be trained in facelift and facial liposculpting techniques in order to provide the best results and properly choose the right procedures for the right patients.

A proposed protocol for correlation between bone density in hemimandibular hyperplasia radiography and histopathological findings - A retrospective study.

The role of low-dose computed tomography (LDCT) in surgical planning can be assessed based on the correlation among bone density (BD/HU), radiographic values, and the histopathological appearance of hyperplastic overgrowth in mandibular condyles (hemimandibular hyperplasia/osteochondroma). The aim of this study was to evaluate the correlation between LDCT indices of bone-density measurements in surgical planning and histopathological specimens. The patients incuded in this study underwent detailed radiological evaluation as preparation for further clinical procedures. Excised condyles were evaluated in terms of bone density index using LDCT, and then histopathologically to investigate the accuracy of surgical procedures and set the basis for future surgical planning. An index value between both condyles' bone densities represented the relative difference between the healthy condyle and the side with hemimandibular hyperplasia (HH). Patients with unilateral condylar hyperplasia (UCH) showed a statistical correlation between condyle heads with increased bone density (BD) and scintigraphic (SCI) values (p < 0.001). On the other hand, correlation between BD and histopathological studies alone was significant (p < 0.001). With the increase in BD measured in HU in UCH condyles, the overall value of fibrous cartilage layer thickness decreased (p < 0.001). Furthermore, histopathological evaluation indicated that increased bone density on the UCH side resulted in increased total thickness (p > 0.001). The proposed index measurements in the mandibular condyles based on LDCT/BD can be used to estimate the degree of required surgical resection. Results from LDCT radiographic studies correlate with histopathological specimens more than scintigraphy.

Skeletal facial asymmetry: reliability of manual and artificial intelligence-driven analysis.

OBJECTIVES: To compare artificial intelligence (AI)-driven web-based platform and manual measurements for analysing facial asymmetry in craniofacial CT examinations. METHODS: The study included 95 craniofacial CT scans from patients aged 18-30 years. The degree of asymmetry was measured based on AI platform-predefined anatomical landmarks: sella (S), condylion (Co), anterior nasal spine (ANS), and menton (Me). The concordance between the results of automatic asymmetry reports and manual linear 3D measurements was calculated. The asymmetry rate (AR) indicator was determined for both automatic and manual measurements, and the concordance between them was calculated. The repeatability of manual measurements in 20 randomly selected subjects was assessed. The concordance of measurements of quantitative variables was assessed with interclass correlation coefficient (ICC) according to the Shrout and Fleiss classification. RESULTS: Erroneous AI tracings were found in 16.8% of cases, reducing the analysed cases to 79. The agreement between automatic and manual asymmetry measurements was very low (ICC < 0.3). A lack of agreement between AI and manual AR analysis (ICC type 3 = 0) was found. The repeatability of manual measurements and AR calculations showed excellent correlation (ICC type 2 > 0.947). CONCLUSIONS: The results indicate that the rate of tracing errors and lack of agreement with manual AR analysis make it impossible to use the tested AI platform to assess the degree of facial asymmetry.

Helical distraction is superior to linear and circular distraction in mandibular distraction osteogenesis: an in silico study.

Helical mandibular distraction is theoretically better than linear or circular distraction. However, it is not known whether this more complex treatment will result in unquestionably better outcomes. Therefore, the best attainable outcomes of mandibular distraction osteogenesis were evaluated in silico, given the constraints of linear, circular, and helical motion. This cross-sectional kinematic study included 30 patients with mandibular hypoplasia who had been treated with distraction, or to whom this treatment had been recommended. Demographic information and the computed tomography (CT) scans showing the baseline deformity were collected. The CT scans of each patient were segmented and three-dimensional models of the face created. Then, the ideal distraction outcomes were simulated. Next, the most favorable helical, circular, and linear distraction movements were calculated. Finally, errors were measured: misalignment of key mandibular landmarks, misalignment of the occlusion, and changes in intercondylar distance. Helical distraction produced trivial errors. In contrast, circular and linear distractions resulted in errors that were statistically and clinically significant. Helical distraction also preserved the planned intercondylar distance, while circular and linear distractions led to unwanted changes in the intercondylar distance. It is now evident that helical distraction offers a new strategy to improve the outcomes of mandibular distraction osteogenesis.

Analysis of mandibular asymmetry in adolescent and adult patients with unilateral posterior crossbite on cone-beam computed tomography.

INTRODUCTION: This study aimed to evaluate mandibular asymmetry in unilateral posterior crossbite (UPXB) patients and compare the asymmetry between adolescents and adults with UPXB. METHODS: This study included and analyzed cone-beam computed tomography scans of 125 subjects. The subjects were divided into a UPXB group and a control group according to the presence or absence of UPXB, and each group included adolescent patients (aged 10-15 years) and adult patients (aged 20-40 years). Linear, angular, and volumetric measurements were obtained to evaluate the asymmetries of the mandibles. RESULTS: Both adolescent and adult patients in the UPXB group presented asymmetries in condylar unit length, ramal height, body length, and mediolateral ramal inclination (P <0.05). Adult patients with UPXB showed greater asymmetries than adolescents. Differences with condylar unit length, condylar unit width, ramal height, condylar unit volume, and hemimandibular volume were significantly greater in adult UPXB patients than adolescent UPXB patients (P <0.05). CONCLUSIONS: The worsening of mandibular asymmetries in UPXB adults suggests that asymmetry in UPXB patients may progress over time; therefore, early treatment should be considered for UPXB adolescent patients. Further studies are still needed to evaluate the effectiveness of early treatment.

The Role of Digital Surgical Planning and Surgical Guides in the Treatment of Unilateral Condylar Hyperplasia.

Unilateral condylar hyperplasia (UCH) results in facial asymmetry, malocclusion, and temporomandibular joint dysfunction. Treatment consists of both surgical and orthodontic intervention. A review was performed for 4 patients with UCH who underwent digital surgical planning (DSP)-assisted condylectomy. All patients were female, aged 14 to 35 years at the time of operation with facial asymmetry and class III malocclusion. None of the patients had prior treatment and all had perioperative orthodontic appliances to provide fixation and postoperative elastic therapy. All patients underwent DSP-guided condylectomy, and intraoperative surgical cutting guides were used for 3 of the patients. All had significant improvement in facial symmetry and occlusion. None had recurrence, and additional intervention has not been required. If UCH is recognized before marked secondary changes in the maxilla, mandible, and occlusion, future orthognathic surgery may be potentially obviated. Craniomaxillofacial surgeons should consider using DSP and surgical guides in the treatment of UCH.

Deep Learning-based Assessment of Facial Asymmetry Using U-Net Deep Convolutional Neural Network Algorithm.

OBJECTIVES: This study aimed to evaluate the diagnostic performance of a deep convolutional neural network (DCNN)-based computer-assisted diagnosis (CAD) system to detect facial asymmetry on posteroanterior (PA) cephalograms and compare the results of the DCNN with those made by the orthodontist. MATERIALS AND METHODS: PA cephalograms of 1020 patients with orthodontics were used to train the DCNN-based CAD systems for autoassessment of facial asymmetry, the degree of menton deviation, and the coordinates of its regarding landmarks. Twenty-five PA cephalograms were used to test the performance of the DCNN in analyzing facial asymmetry. The diagnostic performance of the DCNN-based CAD system was assessed using independent t -tests and Bland-Altman plots. RESULTS: Comparison between the DCNN-based CAD system and conventional analysis confirmed no significant differences. Bland-Altman plots showed good agreement for all the measurements. CONCLUSIONS: The DCNN-based CAD system might offer a clinically acceptable diagnostic evaluation of facial asymmetry on PA cephalograms.

Combining Patient-specific Implant With Malar Reduction to Repair Mid-facial Asymmetry Caused by Craniofacial Fractures in Asians.

Mid-facial asymmetry caused by bone defect or deformation resulted from craniofacial fracture was a common secondary complication needed to repair. Patient-specific implant (PSI) designed with the unaffected side as a template is a good choice to repair this kind of facial asymmetry. However, in Asians, the broad and prominent zygomatic bone in unaffected side is not an optimal template, because the oval facial shape was considered as a more attractive appearance in Asian esthetic concept. To repair the mid-facial asymmetry and to improve the facial contour, the authors combined PSI implantation with malar reduction in one-stage surgery. The authors referred the facial proportion index (the optimal ratio of mid and lower face was 1.27) as a basis for preoperative precise design to determine the ideal facial shape of unaffected side, and used mirror image overlay technique with the ideal shape of unaffected side as a template to design the PSI. With this surgical strategy, patients not only can repair facial asymmetry but also can get a more attractive appearance.

Total temporomandibular joint reconstruction prosthesis in hemifacial microsomia: A systematic review.

Hypoplastic asymmetry due to hemifacial microsomia (HFM) often represents the most difficult reconstruction in the craniomaxillofacial clinic. Although autogenous grafts are generally used for temporomandibular joint reconstruction (TMJR), the use of TMJR prostheses is not well established. The aim of this review was to identify, collect and analyse the use of extended TMJR (eTMJR) prostheses in patients with HFM, describing clinical features, surgical procedures and postoperative complications. Online searches of all major databases were performed according to PRISMA guidelines. All studies with HFM patients treated with the eTMJR prostheses were included. Descriptive statistics were used for data analysis. A total of 19 studies, including 08 case studies, 06 case series and 05 retrospective cohort studies, met the inclusion criteria, where a total of 42 HFM patients were reported from 18 countries, mostly from the United States (05; 26%). Fifteen of the 42 cases (~36%) were male. The mean ± SD (range) age of patients in all studies was 19.79 ± 5.81 (9-36) years. The mean ± SD (range) of patient follow-up was 41.30 ± 35.50 (6-136) months. A total of 5 (10.6%) patients were implanted with bilateral eTMJR prostheses. The Pruzansky classification was used in 18 (~89.5%) studies, OMENS classification in 01 (~5%) study, whereas no classification was reported in one study. Only 01 (7.1%) study had documented the eTMJR classification for the prosthesis used. In growing patients with or without a history of failed autogenous tissues, TMJR prostheses may provide a viable alternative. Randomized studies with large cohorts are warranted to validate these preliminary results.

Intraoral volume changes in relation to the hard tissue shape changes in asymmetric patients before and after orthognathic surgery - A retrospective CT study.

OBJECTIVES: To evaluate Intraoral volume changes in relation to the hard tissue shape changes in asymmetric patients before and after orthognathic surgery and establish a correlation between them. MATERIALS AND METHODS: A retrospective study which evaluated 12 asymmetric patients' pre and post-surgical CT records satisfying the inclusion criteria. Borders were defined for the measurement of extraoral, intraoral and tongue volume. The volume assessment was carried out using software from 3D SYSTEMS, Colorado, US, Version 1.0.2.2055. RESULTS: Predicting changes in volume between extra-oral, intra-oral spaces and tongue, Linear regression modeling of the data revealed that for every mm3 change in post-surgical extra-oral volume the post-surgical intra-oral volume decreased by 0.684 mm3 and for every mm3 change in post-surgical intra-oral volume, the post-surgical tongue volume increased by 0.728 mm3. CONCLUSIONS: Significant decrease in the extra-oral volume, Intra-oral volume and tongue volume was evident after orthognathic surgery in patients with facial asymmetry. This volumetric approach sheds insight into achieving a muscular equilibrium between intraoral and extraoral structures, which would improve orofacial function and enhance facial aesthetics.

Vascular variation of temporoparietal fascia in microtia associated with hemifacial microsomia.

The study analyzed vascular variations in microtia associated with hemifacial microsomia (HFM). A retrospective analysis was conducted on 47 patients with microtia and HFM, who underwent computed tomography angiography between November 2011 and May 2022. The vascular course and branching supplying the TPF were analyzed. Craniometric measurements were conducted to determine the horizontal distance from the porion and fronto-zygomatic suture (F-Z suture) to the vessels. On the affected side, the TPF was primarily supplied by either the superficial temporal artery (STA) or the postauricular artery-originated STA (Po-STA). The Po-STA (n = 29) was more prevalent than the STA (n = 18), and mostly exhibited a single frontal branch (n = 20). Craniometric analysis revealed that the Po-STA was closer to the porion, ear vestige, and F-Z suture than the STA on the non-affected side. Furthermore, a significant correlation was observed between the severity of mandibular hypoplasia and presence of Po-STA variation (Cramer's V = 0.498, p = 0.005). Microtia associated with HFM exhibits vascular variations in the TPF - in particular, a unique Po-STA variation. The Po-STA is prone to injury during ear reconstruction because of its proximity to the external auditory canal and ear vestige. Surgeons should be cautious of these anatomical variations for safer ear reconstruction procedures, and utilize preoperative imaging for meticulous planning.

Automated three-dimensional analysis of facial asymmetry in patients with syndromic coronal synostosis: A retrospective study.

Craniosynostosis, characterized by premature fusion of one or more cranial sutures, results in a distorted skull shape. Only three studies have assessed facial asymmetry manually in unicoronal synostosis patients. It is therefore important to understand how uni- and bicoronal synostosis affect facial asymmetry with a minimum risk of human bias. An automated algorithm was developed to quantify facial asymmetry from three-dimensional images, generating a mean facial asymmetry (MFA) value in millimeters to reflect the degree of asymmetry. The framework was applied to analyze postoperative 3D images of syndromic patients (N = 35) diagnosed with Muenke syndrome, Saethre-Chotzen syndrome, and TCF12-related craniosynostosis with respect to MFA values from a healthy control group (N = 89). Patients demonstrated substantially higher MFA values than controls: Muenke syndrome (unicoronal 1.74 ± 0.40 mm, bicoronal 0.77 ± 0.21 mm), Saethre-Chotzen syndrome (unicoronal 1.15 ± 0.20 mm, bicoronal 0.69 ± 0.16 mm), and TCF12-related craniosynostosis (unicoronal 1.40 ± 0.51 mm, bicoronal 0.66 ± 0.05 mm), compared with controls (0.49 ± 0.12 mm). Longitudinal analysis identified an increasing MFA trend in unicoronal synostosis patients. Our study revealed higher MFA in syndromic patients with uni- and bicoronal synostosis compared with controls, with the most pronounced MFA in Muenke syndrome patients with unilateral synostosis. Bicoronal synostosis patients demonstrated higher facial asymmetry than expected given the condition's symmetrical presentation.